55
Chapter 3: Maintenance and Component Installation
JITP1
X13DEM
REV:1.02A
BAR CODE
BMC CODE
CPU1
CPU2
JPRG1
MH5
MH10
MH4
MH3
MH2
MH12
MH11
FAN8
FAN7
FAN6
FAN5
FAN4
FAN3
FAN2
FAN1
LEDM1
LED1
LEDBMC
JVRM1
JTPM1
JRK1
MH9
MH1
JUSB3
JRSI2C1 JNVI2C1
JNVVPP1
JRU1
JL1
JF3_JIPMB1
JPCIE2B1
JPCIE2A1
JIO1
JPCIE3B1
JPCIE3A1
JPCIE5B1
JPCIE5A1
P1_NVME0 P1_NVME1
P1_NVME3
P1_NVME2
P2_NVME1
P2_NVME0
P2_NVME3
P2_NVME2
PSU2
PSU1
M.2-H2 M.2-H1
JBT1
BT1
JFP2
JPCIE1
JPCIE4
JAIOM1
JNCSI1
MH16
MH17
MH18
MH19
MH15
JPMW4
JPMW3
JPMW2
JPMW5
JPMW1
JPWR1
JPWR4
JAIOM2SB1
JS1
VROC
RAID Key
Front Panel CTRL2
LEDPWR
LED2
P1_PE0 15-0
P1-AIOM PCIe 5.0 X16
P2_PE4 7-0
P2 PCIe 5.0 X8
P2_PE4 8-15
P2 PCIe 5.0 X8
5.0 X8P2 PCIe
P2_PE3 0-7
P2 PCIe 5.0 X8
P1 PCe 5.0 X8
P1 PCIe 5.0 X8
P1_PE3 8-15
P1 PCIe 5.0 X8
P1_PE3 0-7
P1 PCIe 5.0 X8
P1_PE4 0-7
P2_PE0 0-7
P2 PCIe 5.0 X8
P2 PCI-E 5.0 X8
P2_PE0 8-15
P2_PE1 15-0
P2 SLOT2 PCIe5.0 X16
P2 PCIe 5.0 X8
P2 PCIe 5.0 X8
P2_PE2 8-15
P2_PE2 0-7
BMC LAN/USB/VGA
USB2/3 (3.0)
SATA 0-7
P1_PE1 7-0
P1 PCIe 5.0 X8
P1_PE1 15-8
P1 PCIe 5.0 X8
P1 SLOT1 PCIe 5.0 X16
P1_PE2 15-0
JIPMB1
UID-LED
TPM/PORT80
P2-DIMMD1
P2-DIMMD2
P2-DIMMC2
P2-DIMMC1
P2-DIMMB1
P2-DIMMB2
P2-DIMMA1
P2-DIMMA2
P2-DIMME2
P2-DIMMF2
P2-DIMME1
P2-DIMMF1
P2-DIMMG2
P2-DIMMH1
P2-DIMMH2
P2-DIMMG1
CLEAR
CMOS
P1-DIMMD2
P1-DIMMD1
P1-DIMMC1
P1-DIMMC2
P1-DIMMB1
P1-DIMMB2
P1-DIMMA1
P1-DIMMA2
P1-DIMME1
P1-DIMME2
P1-DIMMF1
P1-DIMMG2
P1-DIMMF2
P1-DIMMH2
P1-DIMMG1
P1-DIMMH1
Battery
UID/System Reset
FP CTRL1
Power Supply Unit 2
Power Supply Unit1
BMC
PCH
P2_PE3 8-15
P1_PE4 8-15
BIOS
Flash_CPLD
FAN10
FAN9
P2 PCIe 5.0 X8
DIMM Installation
1. Insert the desired number of DIMMs into the memory
slots based on the recommended DIMM population
tables in the previous section. Locate DIMM memory
slots on the motherboard as shown on the right.
2. Push the release tabs outwards on both ends of the
DIMM slot to unlock it.
Release Tabs
Push both ends
straight down into
the memory slot.
DIMM Removal
Press both release tabs on the ends of the memory module to unlock it. Once the memory
module has been loosened, remove it from the memory slot.
Warning! Please do not use excessive force when pressing the release tabs on the ends of
the DIMM socket to avoid causing any damage to the memory module or the DIMM socket.
Please handle memory modules with care. Carefully follow all the instructions given on page 1
of this chapter to avoid ESD-related damages done to your memory modules or components.
3. Align the key of the memory module with the receptive point on the memory slot.
Key
4. Align the notches on both ends of the module against the receptive points on the ends
of the slot.
5. Push both ends of the module straight down into the slot until the module snaps into
place.
6. Press the release tabs to the lock positions to secure the memory module into the slot.
Notches
To Next Page
Loading...
