Chapter 1: Introduction
1-5
X7SLM/X7SLM+ Quick Reference
Jumpers Label Description Default Setting
JBT1 #15 CMOS Clear See Chapter 2
JPL1/JPL2 #5, #8 GLAN 1/2 Enable Pins 1-2 (Enabled)
JPT1 (X7SLM+ only) #24 TPM Support Enable Pins 1-2 (Enabled)
JWD #25 Watch Dog Timer Enable Pins 1-2 (Reset)
Connectors Label Description
Battery #11 Onboard Battery
BIOS #14 SPI BIOS Chip
COM1/COM2 #3, #12 COM Port 1/Serial Port Connector 2
Fans 1~5 #31, #27, #19, #35, #33 System Cooling Fans 1~4 & CPU Fan (Fan5)
Floppy #13 Floppy Disk Connector
IDE #22 IDE Hard Drive Connector
I-SATA 0~3 #20 Intel South Bridge SATA Headers
J41 #32 12V 8-pin Power Connector (Required)
JD1 #23 Power LED/External Speaker Header
JF1 #29 FP Control Panel Header
JL1 #16 Chassis Intrusion Header
JOH1 #30 Overheat LED Header
JP3 #21 Power Extension Connector for Add-on card
JPW1 #34 ATX 24-pin Power Connector (Required)
LAN1/LAN2 #6, #7 Ethernet RJ45 (Gigabit LAN) Connectors 1~2
KB/Mouse #1 PS/2 Keyboard/Mouse
Slot 5 #10 PCI-33 MHz
Slot 6 #9 PCI-Express x8 slot
SP1 #26 Internal Speaker/Buzzer
USB 0/1 #2 Back Panel Universal Serial Bus Ports 0/1
USB 2 #17 Internal USB Port 2
USB 3/4 #18 Front Panel USB Connections 3/4
VGA #4 Video Graphics Port
LED Indicator Label Description
LE1 #28 Onboard Power LED Indicator
To Next Page
Loading...
