Supermicro X7SLM - Fan Headers

2-20
X7SLM/X7SLM+ User's Manual
X7SLM/X7SLM+
KB/Mouse
USB 0/1
COM1
VGA
JPL1
LAN1
LAN2
JPL2
LAN
CTRL
Fan4
LAN
CTRL
COM2 Floppy
Battery
Super I/O
SPI BIOS
TPM CTRL
USB2
J45
J46
USB3/4
Fan3
JL1
JBT1
JPT1
JWD
JD1
IDE
PWR Extension
JP3
I-SATA0
I-SATA1
I-SATA2
I-SATA3
Fan2
LE1
FP CTRL
Speaker
SP1
JOH1
Fan1
8-pin PWR
J41
Fan5
CPU Fan
24-pin PWR
JPW1
Intel 945GC
MCH
CPU
DIMM 1A
DIMM 1B
DDR2 Unbuffered Non-ECC 667/533/400 MHz
Slot6 PCI-E x8
Slot5 PCI 33 MHz
Intel ICH 7
JF1
Fan Header
PinDenitions
Pin# Denition
1 Ground (Black)
2 2.5A/+16V
(Red)
3 Tachometer
4 PWM_Control
Fan Headers
The X7SLM/X7SLM+ has ve fan head-
ers (Fan1 ~ Fan5). Fans 1~4 are system
cooling fans. Fan 5 is used as a CPU
fan. These fans are 4-pin fan headers.
However, Pins 1~3 of the fan headers are
backward compatible with the traditional
3-pin fans. (Note: Please use all 3-pin
fans or all 4-pin fans on a motherboard.
Please do not use 3-pin fans and 4-pin
fans on the same board. The default set-
ting is Disabled which allows the onboard
fans to run at full speed.) Refer to the table
on the right for pin denitions.
A
B
A. Fan1
B. Fan2
C. Fan3
D. Fan4
E. Fan5
C
D
E