Supermicro X7SLM - Appendix B Installing the Windows os; Installing the Windows XP;2000;2003 os for Systems Without RAID Functions

Appendix B: Installing the Windows OS
B-1
Appendix B
Installing the Windows OS
After all hardware components have been installed, you must rst congure Intel
South Bridge RAID Settings before you install the Windows OS and other software
drivers. To congure RAID settings, please refer to RAID Conguration User Guides
posted on our website at www.supermicro.com/support/manuals.
Installing the Windows XP/2003 OS for Systems without
RAID Functions
Insert Microsoft's Windows XP/2003 Setup CD in the CD Drive, and the sys-1.
tem will start booting up from CD.
Continue with the OS installation. The Windows OS Setup screen will display.2.
From the Windows XP/2003 Setup screen, press the <Enter> key. The 3.
XP/2000/2003 Setup will automatically load all device les and then continue
with the Windows XP/2003 installation.
After the Windows XP/2003 OS Installation is completed, the system will auto-4.
matically reboot.
Insert the Supermicro Setup CD that came with your motherboard into the CD 5.
Drive during system boot, and the main screen as shown on Page C-1 will
display. Follow the instructions given on the screen to complete your system
setup.