Supermicro X9QR7-TF+ - Peripheral Devices

1-8
X9QR7-TF+/X9QRi-F+ Motherboard User’s Manual
SAS Connections (X9QR7-TF+ Only)
• SAS3.0 Ports SAS 0~3 (JS1), SAS 4~7 (JS2)
• RAID Support RAID 0, 1, 5, 6, 10, 50, 60
IPMI 2.0
• IPMI 2.0 supported by the WPCM450R BMC
Serial (COM) Port
• Two (2) Fast UART 16550 Connection: 9-pin RS-
232 port
Super I/O
• Winbond Super I/O 83527
Peripheral
Devices
USB Devices
• Four (4) USB ports on the rear I/O panel (USB 0/1,
USB 2/3),
• Three (3) USB connections for front access: dual-
port connector (USB 6/7), single-connection header
(USB 5)
• One (1) Type A USB connection for front access
(USB 4)
BIOS
• 16 MB SPI AMI BIOS
®
SM Flash BIOS
• APM 1.2, PCI 2.3, ACPI 1.0/2.0/3.0, USB Keyboard,
Plug & Play (PnP) and SMBIOS 2.5
Power
• ACPI/ACPM Power Management
Cong.
• Main switch override mechanism
• Keyboard Wake-up from Soft-Off
• Power-on mode for AC power recovery
PC Health
CPU Monitoring
Monitoring
• Onboard voltage monitors for 1.8V, +3.3V, 3.3VSB,
+5V Standby, 1.35V, 1.5V, Chipset Voltage, and
Battery Voltage.
• CPU 7-Phase switching voltage regulator
• CPU/System overheat LED and control
• CPU Thermal Trip support
• Thermal Monitor 2 (TM2) support
• Intel® Manageability Engine (ME)
• Intel
®
Intelligent Power Node Manager (NM)