Chapter 2: Confi guring BMC IPMI Settings
2-33
Power Control and Status
Power Control and Status: 1. This submenu indicates the status and the cur-
rent power control settings of the host server (the remote console).
The status of the remote server are displayed as below:2.
Reset Server: Click on this radio button to reset the power control settings for
•
the remote server.
Power Off Server - Immediately: Click on this radio button to immediately power
•
off the remote server.
Power Off Server - Orderly Shutdown: Click on this radio button to power off
•
and shut down the remote server in an orderly manner.
Power On Server: Click on this radio button to power on the remote server.
•
Power Cycle Server: Click on this radio button to power cycle the remote •
server.
Perform Action: 3. After selecting a power setting from the list above, click on
this item to execute the command and perform the action.
To Next Page
Loading...