4-12
X10DRi/X10DRi-T User’s Manual
Gen3 UP Tx Preset
This feature allows the user to select the preset setting for an upstream com-
ponent transmitter. The options are Auto, P0 (-6.0/0.0 dB), P1 (-3.5/0.0 dB), P2
(-4.5/0.0 dB), P3 (-2.5/0.0 dB), P4 (0.0/0.0 dB), P5 (0.0/-2.0 dB), P6 (0.0/-2.5
dB), P7 (-6.0/-3.5 dB), P8 (-3.5/-3.5 dB), and P9 (0.0/-3.5 dB).
Hide Port?
Use this feature to hide the root port from the operating system. The options
are no and yes.
IIO1 Conguration
IOU2 (IIO PCIe Port 1)
This item congures the PCI-E port Bifuraction setting for a PCI-E port specied
by the user. The options are x4x4, x8, and Auto.
IOU0 (IIO PCIe Port 2)
This item congures the PCI-E port Bifuraction setting for a PCI-E port specied
by the user. The options are x4x4x4x4, x4x4x8, x8x4x4, x8x8, x16, and Auto.
IOU1 (IIO PCIe Port 3)
This item congures the PCI-E port Bifuraction setting for a PCI-E port specied
by the user. The options are x4x4x4x4, x4x4x8, x8x4x4, x8x8, x16, and Auto.
No PCIe Port Active ECO
Use this feature to select a workaround setting to implement the engineering-
change order (ECO) on the system when PCI ports are not active. The options
are PCU Squelch exit ignore option and Reset the SQ FLOP by CSR option.
Socket 0 PcieD01F0 - Port 1A ~ PcieD03F2 - Port 3C
PCIe Port
Select Enable to enable a PCI-E port specied by the user. Select Disable to
de-activate a PCI-E port specied by the user. Select Auto for the BIOS ROM
to automatically discard a PCI-E port specied by the user when there is no Hot
Plug-capable device connected to this port or when there is no error detected
in this port. The options are Auto, Enable, and Disable.
Hot Plug Capable
Use this feature to enable or disable Hot Plug support for a port specied by the
user. The options are Disable and Enable.
To Next Page
Loading...
Need help?
General
