Chapter 4: AMI BIOS
4-27
Erasing Settings
Erase Event Log
Select Enabled to erase the SMBIOS (System Management BIOS) Event Log,
which is completed before a event logging is initialized upon system reboot. The
options are No, Yes Next Reset, and Yes Every Reset.
When Log is Full
Select Erase Immediately to immediately erase SMBIOS error event logs that
exceed the limit when the SMBIOS event log is full. Select Do Nothing for the
system to do nothing when the SMBIOS event log is full. The options are Do
Nothing and Erase Immediately.
SMBIOS Event Log Standard Settings
Log System Boot Event
Select Enabled to log system boot events. The options are Disabled and Enabled.
MECI (Multiple Event Count Increment)
Enter the increment value for the multiple event counter. Enter a number from 1 to
255. The default setting is 1.
METW (Multiple Event Count Time Window)
This item allows the user to decide how long (in minutes) should the multiple event
counter wait before generating a new event log. Enter a number from 0 to 99. The
default setting is 60.
View Smbios Event Log
This item allows the user to view the event in the SMBIOS event log. Select this
item and press <Enter> to view the status of an event in the log.
Date/Time/Error Code/Severity
View System Event Log
This item allows the user to view the System event log. Select this item and press
<Enter> to view the status of an event in the log.
Date/Time/Error Code/Severity
To Next Page
Loading...
Need help?
General
