6.4 F2 System Calibration6.4 F2 System Calibration
6.4.1 Zero Calibration6.4.1 Zero Calibration
Keep the belt Keep the belt
weigher running without load weigher running without load
for correcting Zero for correcting Zero
P110 Cal. RevsP110 Cal. Revs
Remainder length of a Remainder length of a
Display Flow, Load or AD ValueDisplay Flow, Load or AD Value
Main Display InterfaceMain Display Interface
: F2 Calibration: F2 Calibration
: 1 Zero Cal.: 1 Zero Cal.
Revolution CountRevolution Count
After running Calibration After running Calibration
E% = (ER / Max. AD Value) × 100%E% = (ER / Max. AD Value) × 100%
ER = New Zero Value - Old Zero ValueER = New Zero Value - Old Zero Value
Max. AD Value = 60000Max. AD Value = 60000
To Next Page
Loading...
Need help?
General
