Supmeter BST106-B60S(L) - User Manual

BST106-B60S[L]
Weighing / Force Measuring Controller
Weight/Force Display, Peak Value Detection / Display Holding
Setpoint DO Output, AO/Digit Transmission
Operation Manual V5.0
Changsha Supmeter Technological Co.,Ltd.

Supmeter BST106-B60S(L) Specifications

General

Brand	Supmeter
Model	BST106-B60S(L)
Category	Controller
Language	English

Summary

Preface and Product Features

Main Features

Lists the key applications, design features, and capabilities of the controller.

Safety Precautions

General Safety Guidelines

Details crucial safety guidelines for operation, installation, and environment.

Environmental and Physical Protection

Covers environmental conditions, grounding, cable laying, and power supply safety.

Technical Specifications

Product Specifications Overview

Installation and Connectivity

Terminal Connections and Signal Inputs

Details terminal assignments for signals, communication, and power inputs.

Terminal Pin Assignments for Outputs and Communication

Lists pin details for AO, COM ports, and relay outputs.

Parameter Configuration (F1.SET)

Parameter Setting Menu Overview

Weighing, Filtering, and Signal Type Parameters

Calibration Parameters (CALP)

Covers parameters for auto zero tracking, fine adjustment, and loadcell sensitivity.

Setpoint Parameters (SEtP)

System Calibration Procedures (F2-CAL)

System Calibration Overview

Zero Calibration

Guides on performing zero calibration without load.

Data Calibration (mV, mA, Voltage)

Details data calibration steps for different weighing signal types.

Load and Span Correction Calibration

Guides on load calibration and advanced span correction.

Segmenting Span Correction (SEgC)

Explains advanced span correction using multiple correction points.

Appendices

MODBUS Communication Registers

Data Frame Format for Continuous Sending