Supmeter BST106-B60S(L) - F2-Cal System Calibration; Zero Calibration (Zero)

24
6.3 F2-CAL System Calibration
After doing ‘System Calibration’, Tare Weight value will return to zero automatically.
6.3.1 Zero Calibration (ZEro)
Do Zero Calibration without loading on the weigher and save the new Zero Value.
【■】: Exit 【 】: Save
M
Main Display Interface
【■】+【►】【 ▲】
【 】+【►】【 ▲】
【 】
M
【►】【 ▲】:
 [104] Zero Value.
 E XX.XX: Voltage Value [mV].
 U XX.XX: Voltage Value [V].
 A XX.XX: Current Value [mA].
If Zero Value exceeds allowed range, it’s not
allowed to be saved.