together with the product because of embargo, please make a purchase according to the
model offered by us and install it by yourself.
Prohibit using the product under the dangerous
explosive dust. If you have
this need, please use our
Make sure that the product works under the
with allowed temperature range to
get good performance and long working life.
Please keep the product away from direct sunlight. If it is installed in a cabinet, please install
cooling fans on the top of the cabinet.
Controller Grounding Protection
The product, as a low-voltage equipment, should be kept away from the high-voltage
For avoiding bodily injury from electric shock accident and k
eeping the product separate from
the product should be grounded directly and
resistance should be less than 4Ω.
Scale Frame Grounding Protection
For avoiding bodily injury from electric shock accident and keeping the loadcells and speed
sensor separate from strong interference, the scale frame should be connected with the
electronic scale grounding net and the
ground resistance should be less than 4Ω.
Weighing signal, speed signal, analog signal and communication signal cables should be laid
in pipes, and do not lay them
Please make sure that the inputted voltage is correct before power-on.
If the voltage fluctuation exceeds the allowed range, please use a power stabilizer to get a
Before the Lithium battery equipped in the product being discarded, please insulate its
positive or negative pole, do not put it into fire.
environments, it’s possible to be polluted. So, while being discarded as worthless, the product
should be processed lawfully as leady industrial waste for environment protection.
The installation, wiring and maintenance should be operated by the engineers with the
relevant professional knowledge and safety operation ability. Although being not described in
this manual, the relevant safety operating procedures and standards should be followed.
To Next Page
Loading...
Need help?
General
