RMK-700 Operating Manual
● Adjust the height of the chin by rotating the height adjustment knob so
that the eye of the examinee is aligned with the height adjustment mark
on the headrest.
(3) Perform Focusing
● Slide the operation joystick to the left so that the right eye of the
examinee is displayed on the monitor.
● Ask the examinee to look at the red icon in the center of the scene(eye
fixation target).
● Looking at the monitor, check that image of the ARRAY RING is not
obscured by the upper eyelid, if it is covering the ring, instruct the
examinee to keep his/her eye opened widely until measurement ends.
● Looking at the monitor, incline the operation joystick to right or left,
and turn the operation joystick so the pupil is centered with the inner
alignment mark and focus on the ARRAY RING.
(4) Measurement
● Ü button and Þ button in the center is to adjust the movement of left
bar, and Þ button and Ü button in right side is to adjust the movement
of right bar
● The measured value shall be indicated on the screen of monitor；
● Store the measured value by pushing the measurement button.
● Repetition of Measurement
● Repeat the measurement in the entry of measured value as many times
To Next Page
Loading...