Supra SR - Ballast and Comfort Systems; Ballast System Operation

51 —
© 2016 Skier’s Choice, Inc.
2016-07-26 1611937
-27-
Ballast
The Ballast screen can be accessed by pressing the Ballast Quick Access Key. This
screen displays the current state of the ballasts and is interactive for immediate settings.
To adjust the Ballast settings slide finger up the tank to the desired level or tap the UP or
DOWN arrows below the tank. As an example, the illustration shows the Center tank filling to
achieve 51 percent and the left and right ballasts have achieved 50 percent tank capacity.
The following functions can also be accomplished from this screen:
• FILL ALL – touch to fill all the ballasts
• DRAIN ALL – touch to drain all the ballasts
• STOP ALL – touch to stop all filling or draining activity
• SAVE – touch to save the current settings to the current profile or a new profile
• X – touch to exit the current screen
Comfort
The Comfort screen can be accessed by pressing the Comfort Quick Access Key. On
the Comfort screen, touch a cell to activate. Touch it again to change the setting or use the
arrows. The following comfort settings can be made if the option is installed on your boat
package:
• Heater – HIGH/LOW/OFF
• Seat Heater – ON/OFF
• Seat Height – UP/DOWN
These settings can also be set for specific boat drivers through the driver presets.