EasyManua.ls Logo

SUPREME SOFT User Manual

SUPREME SOFT
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SUPREME SOFT
www.supremefilters.com
Installation Manual
Instrukcja montażu
Montageanleitung
Инструкция монтажа
Question and Answer IconNeed help?

Do you have a question about the SUPREME SOFT and is the answer not in the manual?

SUPREME SOFT Specifications

General IconGeneral
Operating Pressure40-80 PSI
Storage Tank Capacity3.2 Gallons
Filtration TechnologyReverse Osmosis (RO)
Filter Stages5
Included FiltersSediment Filter, RO Membrane, Post-Carbon Filter
Warranty1 year

Summary

Installation Record

Important Information

Operating Conditions and Requirements

Installation

Inlet & Outlet Connections

Details regarding the appliance inlet and outlet connections, including recommendations for bypass and hoses.

3-Valve Bypass System Installation

Instructions for installing the 3-valve bypass system and connecting the appliance.

Drain Connections

Guidelines for connecting drain hoses, ensuring air gaps, and proper layout for wastewater.

Commissioning

Electrical Connections

Instructions for connecting the appliance's power supply and transformer.

Pressurizing the Appliance

Steps to safely pressurize the appliance and flush air and debris.

Brine Cabinet Setup

Instructions for adding water conditioner salt to the brine cabinet and preparing brine solution.

Residual Hardness Adjustment

Adjusting the residual hardness of the treated water using the bypass system.

Manual Regeneration Initiation

How to manually initiate a regeneration cycle for the appliance.

Electronic Control Panel

Power-Up Sequence

Information on the display sequence after powering up the appliance.

Power Failure Handling

How the appliance handles power failures and what to do after power is restored.

Timer Failure Indication

Information on what to do in case of a timer failure.

Maintenance Reminder Function

Details on the maintenance reminder function and recommended actions.

Service Mode Display

Display information when the appliance is in service mode.

Regeneration Mode Display

Information displayed during regeneration cycles.

Flow Meter Verification

How to verify the correct functioning of the water meter.

Manual Regeneration Procedures

Instructions for manually initiating immediate or delayed regeneration.

Basic Programming Settings

Guide to setting language, time, and hardness units.

Maintenance

Routine Checks

Basic checks to verify correct appliance functioning and identify potential issues.

Bypassing the Appliance

Steps to hydraulically bypass the appliance for maintenance or specific usage scenarios.

Water Conditioner Salt Management

Guidance on maintaining the correct level of water conditioner salt and addressing salt bridging.

Appearance and Cleaning

Recommendations for cleaning and maintaining the appliance's exterior appearance.

Resin Cleaner Usage

Information on using resin cleaner to maintain softening capacity.

Appliance Sanitization

Details on appliance sanitation and the 'days override' feature.

Datenblatt

Related product manuals