To Next PageTo Next Page
Need help?Do you have a question about the Sure Electronics WONDOM JAB Series and is the answer not in the manual?
General| Product Category | Amplifier |
|---|---|
| Series | JAB |
| Power Supply | DC 12-24V |
| Protection | Over-current, Over-temperature, Short-circuit |
| Frequency Response | 20Hz-20kHz |
| Signal-to-Noise Ratio | >90dB |
| Operating Temperature | -20℃ to 85℃ |
| Channels | 2 |
Details for the 2 x 15 Watt Class D Audio Amplifier Board (JAB1).
Details for the 2 x 30 Watt Class D Audio Amplifier Board (JAB2).
Details for the 2 x 50 Watt Class D Audio Amplifier Board (JAB2).
Features of the Interface Extension Board for JAB series.
Explains the design considerations for achieving high sound quality.
Highlights BQB, APT-X, CE, FCC, and RoHS compliance.
Service for customizing the Bluetooth pairing name.
Information on configuring the Parallel Bridge Tied Load mode.
Details on low power consumption for extended playback.
Covers power supply, idle, standby, charging voltage/current.
Covers noise, BT version, gain, SNR, THD, and output power.
Technical specs for the 2x30W JAB2 amplifier board.
Technical specs for the 2x50W JAB2 amplifier board.
Diagram showing JAB1 connections for input and output.
Detailed guide on plugging in the AUX line-in cable.
Diagram showing JAB2 connections for input and output.
Information on battery voltage, protection, and consumption.
List prices for JAB series amplifier boards.
