Do you have a question about the Sure Electronics WONDOM JAB2 and is the answer not in the manual?
Details for the 2 x 15 Watt Class D Audio Amplifier Board, including features and specifications.
Details for the 2 x 30 Watt Class D Audio Amplifier Board, highlighting advanced features and compatibility.
Details for the 2 x 50 Watt Class D Audio Amplifier Board, featuring advanced capabilities and specifications.
Explanation of the audio quality, SNR, and THD+N performance.
Information on BQB, APT-X, CE, FCC readiness, and RoHS compliance.
Defines pins for the speaker output connector (J1).
Pin definitions for the power input connector (J7).
Technical specifications and parameters for the JAB1 amplifier board.
Technical specifications for the 2 x 30 Watt Class D Audio Amplifier Board.
Technical specifications for the 2 x 50 Watt Class D Audio Amplifier Board.
Diagram showing input connections for JAB1 including Bluetooth and power.
Graphs showing Frequency Response and THD + N for JAB1.
Graphs showing Frequency Response and THD + N for JAB2-250.
Graphs showing Frequency Response and THD + N for JAB2-230.
| Frequency Response | 20Hz - 20kHz |
|---|---|
| Bluetooth Range | 10 meters |
| Input Impedance | 10KΩ |
| Input Voltage | 12V-24V DC |
| Channels | 2 |
| Features | Bluetooth |
| Output Power | 2 x 50W @ 4Ω |
| THD+N | <0.1% (1W, 1kHz) |
| Protection | Over voltage protection, Short circuit protection, Over heat protection |
Loading...