396-3815Y1 SureFire PumpRight for Raven RCM iii Revised 12/04/2019
Hydraulic Fluid and Equipment Safety
This system uses hydraulic equipment with hydraulic fluid under extremely high pressure.
Hydraulic fluid escaping under pressure can have sufficient force to penetrate the skin causing serious injury.
Keep all hoses and connections in good serviceable condition. Failure to heed may result in serious personal
injury or death. Avoid the hazard by relieving the pressure before disconnecting lines or performing work on
the system.
Make sure hydraulic fluid connections are tight and all hydraulic hoses and lines are in good condition before
applying pressure to the system. Use a piece of paper or cardboard, NOT BODY PARTS, to check for
suspected leaks. Wear protective gloves and safety glasses or goggles when working with hydraulic systems.
DO NOT DELAY!
Check hydraulic hoses and fittings frequently. Loose, broken, and missing hardware can cause equipment to
not perform properly and can result in serious injury or death.
Hydraulic systems can be hot and cause burns. Before working on any system, wait until the fluid has
cooled.
If an accident occurs, see a doctor familiar with this type of injury immediately. Any fluid injected into the skin
or eyes must be treated within a few hours or gangrene may result.
A Word to the Operator
SAFETY IS YOUR RESPONSIBILITY.
YOU are the key to safety.
It is YOUR responsibility to read and understand the safety messages in this manual.
This system may be used to apply many different kinds of agricultural liquid products. Read and follow all
label information and instructions related to the handling, storage, and application of the product you are
using.
All electrical harnessing should be checked regularly and should be routed and secured so it will not be
pinched, cut, or stretched.
To Next Page
Loading...
