Surefire PumpRight PR17 - Page 55

396-3815Y1 SureFire PumpRight for Raven RCM 49 Revised 12/04/2019
Read the Raven RCM Operator’s Manual for safety information and additional setup/operating information.
Main Screen / Run Page
26
73
Diagnostics >
System Information
Menu
• Hardware / Software
• Switchbox
• Delivery System
• Section Status
• System Voltages
• Working Parameters
• Switches / Status
• Pressure Sensors
• Bin Level Sensors
• RPM Sensors
• Tank Fill Monitor
Diagnostics >
Tests
Menu
• Nozzle Flow Check
• Rinse Cycle
• Control / Section Test
• Calibrate PWM Limits
Diagnostics
System Summary
Product Summary
Pressure Sensor Information
Delivery System Information
Should be 0.
Frequently Used System Information Screens
Tests > Control / Section Test
Tests > Nozzle Flow Check
These tests can be run at initial system startup or for troubleshooting.
Similar tests can also be run from the Run Page using Manual and Auto
Mode with a Test Speed.
When testing with
water, the system
pressure will be
much less than it
will be with a
fertilizer product.
Tests > Calibrate PWM Limits
21
Tap Test
look here
F
Setup &
Operation
SureFire Ag Systems