EasyManua.ls Logo

Suunto D4 - Safety Stops; Recommended Safety Stops

Suunto D4
106 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Table 5.7. RGBM model settings
EffectDesired TablesRGBM setting
Full RGBM effects
Standard Suunto RGBM
model (Default)
100%
Smaller RGBM effects, higher risk!Attenuated RGBM model50%
5.10. Safety Stops
Safety Stops are widely considered good diving practice for recreational diving, and
are an integral part of most dive tables. The reasons for performing a Safety Stop in-
clude: reducing sub-clinical DCI, microbubble reduction, ascent control, and orientation
before surfacing.
The Suunto D4 displays two different types of Safety Stops: Recommended Safety
Stop and Mandatory Safety Stop.
5.10.1. Recommended Safety Stops
With every dive over 10 meters, there is a three minute countdown for the Recommen-
ded Safety Stop, to be taken in the 6 - 3 m/10 ft - 20 ft range. This is shown with the
STOP sign and a three-minute countdown in the center window instead of the no-de-
compression time.
46

Table of Contents

Related product manuals