EasyManua.ls Logo

Suunto D4 - Suunto D4 Care and Maintenance

Suunto D4
106 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Should moisture appear inside the case, immediately have the instrument
checked by your SUUNTO dealer or distributor.
Should you detect scratches, cracks or other such flaws on the display that
may impair its durability, immediately have it replaced by your SUUNTO dealer
or distributor.
Wash and rinse the unit in fresh water after every use.
Protect the unit from shock, extreme heat, direct sunlight, and chemical attack.
The dive computer cannot withstand the impact of heavy objects like scuba
cylinders, nor chemicals like gasoline, cleaning solvents, aerosol sprays, adhes-
ive agents, paint, acetone, alcohol, etc. Chemical reactions with such agents
will damage the seals, case and finish.
Store your dive computer in a dry place when you are not using it.
The dive computer will display a battery symbol as a warning when the power
gets too low. When this happens, the instrument should not be used until the
battery has been replaced.
Do not fasten the strap of your dive computer too tightly. You should be able
to insert your finger between the strap and your wrist. Shorten the strap by
cutting it if you do not expect to need the extra length.
MAINTENANCE
The instrument should be soaked, thoroughly rinsed with fresh water, then dried
with a soft towel after each dive. Make sure that all salt crystals and sand particles
have been flushed out. Check the display for possible moisture or water. DO NOT
use the dive computer if you detect any moisture or water inside. Contact an au-
thorized Suunto dealer for battery replacement or other service.
78

Table of Contents

Related product manuals