13.1 Sleep mode and initial settings
To change the initial settings, you have to put the device into sleep mode.
To put the device into sleep mode:
1. After the last step of general settings, when the device asks you to confirm
that the setting changes are done, keep pressed until the device goes
into sleep mode.
2. Press any button to activate the device again.
3. Set the initial settings, see Chapter 5 Getting started on page 9.
NOTE: When replacing the battery, only the time and date change. The device
remembers your previous initial settings and recorded exercises.
13.2 Changing language
If you want to change the device's language or you have chosen the wrong
language when setting up the device, the device needs to be put to sleep. For
information on how to put the device to sleep, see Section 13.1 Sleep mode and
initial settings on page 26
NOTE: The device remembers your previous initial settings and recorded
exercises.
26
To Next Page
