Due to transportation and packaging, some of the accessories may be supplied disassembled.
Please follow the assembly instructions.
Step 1
Install gun hook and power cord hook,(For both model A/B&C/D)
Step 2
Screw the washer handle tight to the main body as below fig. The screws will be packed together
with the main body, pls kindly check and find it when unpacked.
Step 3
A Insert the extension wand(K) into the gun. Push and turn the adjustable nozzle clockwise onto
the gun(J) until hand tight to lock it in place. When the pieces are joined properly, you cannot
separate the two components by pulling straight out on the adjustable nozzle. All attachments
must be inserted into the gun for proper use.
To Next Page
Loading...