6-37
4. Open the right and left front small
box. Remove the screws and fas-
teners. Unhook the hooks. Pull the
front panel 3 backward and
remove it.
NOTE: It is not necessary to discon-
nect the seat heater switch coupler.
(AN650Z)
5. Disconnect the socket 4 from the
headlight.
6. Remove the rubber cap 5.
7. Unhook the bulb holder spring 6
and pull out the bulb socket 7.
8. Fit the new bulb.
9. To reinstall the headlight, reverse
the sequence described above.
NOTICE
The headlight bulb’s life may be
shortened by oil from your fingers
if you touch it.
When replacing the headlight
bulb, be careful not to touch the
glass. Grasp the new bulb with a
clean cloth.
To Next Page
Loading...
