2-24
SHIFT MODE CHANGE SWITCH
“” 0
Push the shift mode change switch to
change from DRIVE mode to MAN-
UAL mode and vice versa.
DRIVE mode:
The drive mode indicator in the instru-
ment panel shows D. The transmis-
sion shifts automatically.
MANUAL mode:
The gear position indicator shows a
numeral. The transmission can be
changed by pushing the shift switch
4.
RIGHT HANDLEBAR
ENGINE STOP SWITCH 1
“” position
The ignition circuit is off. The engine
cannot start or run.
“” position
The ignition circuit is on and the
engine can run.
HAZARD WARNING SWITCH “”
2
All four turn signal lights and indica-
tors will flash simultaneously when
the switch is turned on with the igni-
tion switch in the “ON” or “P” position.
Use the hazard warning lights to warn
other traffic during emergency park-
ing or when your vehicle could other-
wise become a traffic hazard.
FRONT BRAKE LEVER 3
The brake is applied by squeezing the
front brake lever gently towards the
grip. The brake light will be lit when
the lever is squeezed inward.
DM
SCREEN
To Next Page
Loading...
