6-39
BRAKE LIGHT/TAILLIGHT,
REAR TURN SIGNAL LIGHT AND
LICENSE PLATE LIGHT BULB
REPLACEMENT
To replace the brake light/taillight
bulb, rear turn signal light bulb and
license plate light bulb, follow the pro-
cedure below:
1. Remove the fasteners 1. Unhook
the hooks 2. Pull the under frame
cover 3 backward and remove it.
Brake Light/Taillight
/Rear Turn Signal Light
2. Turn the socket counterclockwise
and remove the socket.
Brake light/Taillight bulb
Rear turn signal light bulb
3. Turn the socket counterclockwise
and remove the socket.
4. Push in on the burned-out bulb,
turn it to the left, and pull it out.
5. To fit the replacement bulb, push it
in and turn it to the right while
pushing.
To Next Page
Loading...
