Suzuki df2.5 - Page 100

2. lnstaH the gasket and breather plate (2) to the cylinder block
and secure with th e three screws.
3. Install the thermostat Q) .
4. Apply sealant to both surfaces of thermostat cover gasket
(as
sh own with hatched lines).
SUZUKI SILICONE SEAL
5. I ns tal! th e gasket and the thermostat cover @ to the cylinder
block
and secure with the four bolts.
CYLINDER HEAD
Install the cylinder head . (See page 6-8 and 6-9.)
POWER UNIT
In stall the power un it (See page 6-4 to 6-6.)
POWERUNIT 6- . 37