CLEANING AND INSPECTION
with
solvent and compressed air
Do
not
place
any
rubber,
plastic
and
solvent, as severe damage
or
Do
not
use a
wire
or
a
small
drill
bit
in
order
to
clean
BODY AND FLOAT CHAMBER
the carburetor body and the float chamber. crack or
replace the body and/or the chamber.
the carburetor body and the
float chamber
in
order to
remove
obstructions.
and the nozzle. If crack or other damage
is
the and/or the nozzle.
and the nozzle
in
order to remove obstructions.
NEEDLE VALVE
the
needle valve.
or wear
is
replace the valve.
To Next Page
Loading...
