18
DF2.5
(Serial
No.
21
0001
and
later)
INSPECTION
NOTE:
If
excessive wear, crack, defective
or
other damage is found on
any
component, replace. ·
• Inspect the push rod. If excessive wear or other damage is
found,
replace.
• Inspect
the clutch dog shifter. If excessive wear, crack, chip or
other damage is found,
replace.
• Inspect
the return spring. If excessive wear
or
other damage
is
replace.
• Inspect
the propeller shaft.
If.
excessive wear, twist or other
damage is found,
replace
REASSEMBLY OF
PROPELLER SHAFT COMPONENTS
• Reassemble propeller
shaft components with reverse order of
disassembly.
• Apply
the Water Resistant Grease
to
the 0-ring
CD
and
the
oil
seals of the bearing housing .
• 99000-25350: SUZUKI WATER RESISTANT GREASE
NOTE:
When
installing the propeller shaft/housing assembly
to
the gear
case,
hold
the clutch dog shifter the horizontal to
prevent
clutch
dog shifter dropping out.
(