2·4
PERIODIC
MAINTENANCE
ENGINE OIL CHANGE
Change
initially
after
20
hours
(1
month) and every
100
hours
(6
months)
thereafter.
NOTE:
Change the engine oil while the engine is warm.
1.
Place the motor
in
a vertical position and remove the motor
cover.
2.
Remove the oil filler cap.
3.
Place a container under the engine oil drain plug.
4.
Remove the engine oil drain plug and the gasket
in
order to
drain the engine
oil.
5.
Install the gasket and the engine oil drain plug.
Tighten the plug to the specified torque.
Engine
oil
drain
plug:
10
N·m (1.0 kg-m, 7.0 lb-ft)
I CAUTION I
Do
not
re-use the removed gasket. Always use a new
gasket.
6.
Pour the recommended engine oil to the upper limit.
7.
Tighten the oil filler cap securely.
Engine
oil
amounts: 0.38 L (0.40/0.33 US/Imp. qt)
8.
Start the engine. Allow the engine to
run
for several minutes
at the idle speed. Check for
oil leakage.
9.
Turn off the engine and wait for approx. two minutes.
Re-check the engine
oil level. (See page 2-3.)
To Next Page
Loading...
