4·4
FUEL
SYSTEM
INSTALLATION
Installation
is reverse order of removal with the special attention
to the following steps.
I CAUTION I
I '
1
1
Do
not
re-use the removed gasket. Always use a new
. gasket.
• Tighten the carburetor mounting bolts to the specified torque.
mounting
bolt: 10 N·m (1.0 kg-m, 7.0 lb-ft)
Throttle
control
cable
installation
and
adjustment
(See page 4-6.)
CHECK FOR FUEL LEAKAGE
1.
Twist the air-vent screw
on
the fuel tank cap counter-
clockwise to open the vent.
2. Turn the fuel cock lever
"ON" position.
3.
Check the fuel line for leaks.
To Next Page
Loading...
