Suzuki df2.5 - Page 85

POWER UNIT
AND SERVICING
NOTE:
If excessive wear, crack, defective or other damage is found on
any replace.
Cam face
the cam face for scratches and wear.
Cam wear
Measure the cam
iRXlt 09900-20202: Micrometer
Standard:
IN. & EX. 28.480- 28.680 mm (1.1213- 1.1291
Service limit: IN. & EX. 28.180 mm (1.1094
the measurement exceeds the service
shaft.
replace the cam-
gear for wear or other damage.
it necessary.
the cam rocker arm for wear
or other damage.
necessary.