MOTOR INSTALLATION 3-19
DUAL MOTOR
For the distance between the centers, refer to minimum space of the previous section.
1. On the horizontal chine-to-chine distance, mark B the point at 1/2 of the distance between the engine
centers away from and on each side of the vertical line A that has been previously measured for single
engine mounting.
2. On the horizontal stripe-to-stripe distance, mark C the point at 1/2 of the distance between the engine
centers away from and on each side of the vertical line A that has been previously measured for single
engine mounting.
3. Using a ruler, mark the vertical centerline intersecting with the two marks for mounting the dual engines.
Reference
Chine
Chine
Stripe
Stripe
A
Distance between centers
B
C
To Next Page
Loading...
