1-2 UNCRATING
UNCRATING PROCEDURES
DF200/225/250
The following explains the uncrating procedures for models DF200/225/250.
The procedures are also applicable to other models packed with steel frame.
Metal crates may have sharp edges and may cause injury.
The operators should wear appropriate clothing, including long sleeve shirt, long pants, safety
glove and safety gear for handling crates.
Handling crates requires two or more operators.
Tools for uncrating
• Wrench (12 mm/14 mm)
• Wrench (17 mm/19 mm)
• Scissors
1. Check damage due to vibration or impact dur-
ing transportation. If there are any abnormal
condition found, take photograph in the pres-
ence of the carrier and notify to the Suzuki
distributor.
2. Cut the strap A with scissors.
3. Lift the carton B by two or more operators to
remove it.
4. Remove the parts C which come supplied in
the crate.
Wrench
(17 mm·19 mm)
Wrench
(12 mm·14 mm)
Scissors
Do not place heavy objects on top of the crate.
Use a minimumu of 1.2 mm(48 ) fork length.
''
Do not place heavy objects on top of the crate.
Use a minimumu of 1.2 mm(48 ) fork length.
''
To Next Page
Loading...
