Suzuki DF250AP - MOTOR COVER AND MULTI-FUNCTION GAUGE INTRODUCTION; METER (OPTION) MULTI-FUNCTION GAUGE

22
MOTOR COVER FASTENING ADJUST-
MENT
If you feel motor cover fastening is loose or too
tight when locking the levers, adjust as follows:
1. Loosen the bolts 1, 2 and 3.
2. Adjust the position of fasteners 4, 5 and
6. To increase the fastening, move the fas-
teners to the direction A. To decrease the
fastening, move the fasteners to the direc-
tion B.
3. Tighten the bolts.
Motor cover
METER (OPTION)
MULTI-FUNCTION GAUGE
This gauge is multifunctional gauge that dis-
plays the various information through digital
communication with the engine.
Information displayed are engine speed, shift
position, fuel level, fuel consumption, etc.
NOTE:
There is information that cannot be displayed
depending on the model and equipment.
NOTE:
Consult your authorized Suzuki marine dealer
for setting up the multi-function gauge.
NOTE:
For details the proper handling of the multi-
function gauge, refer to “OPERATION
INSTRUCTION MANUAL” packed in the gauge.
NOTE:
The navigation data on this gauge should be
used only for your reference. When exact navi-
gation information is required, use nautical
charts and/or accurate navigation instruments
together with the multi-function gauge.