73
SPARK PLUG
Remove the spark plugs as follows:
1. Remove the bolts 1 securing the air duct
guard.
2. Remove the air duct guard 2.
3. Remove the bolt securing the ignition coil.
4. Pull out the ignition coil.
5. Loosen and remove the spark plug using the
box wrench in the tool bag.
Your outboard motor comes equipped with the
following “standard” spark plug for normal
usage.
NGK BKR6E Standard
A normally operating spark plug is very light-
brown in color. If the standard plug is not suit-
able for your operating, consult your authorized
Suzuki Marine Dealer.
NOTICE
Non-resistor types of spark plugs will inter-
fere with the function of the electronic igni-
tion, causing misfiring, or causing problems
with other electronic boat equipment and
accessories.
Use ONLY resistor type spark plugs in your
outboard motor.
To Next Page
Loading...
