51
(4)After draining completely, retighten drain
screw 1.
5. Install the starboard side cover.
6. Install the motor cover.
7. Remove the mounting bolts.
8. Loosen the clamp screws.
9. Lift the motor off the transom.
10. Stand the motor vertically and drain the
water from the lower unit.
11. To carry, hold the motor by gripping the tiller
handle bracket and engine side cover.
WARNING
Gasoline is extremely flammable and toxic. It
can cause a fire and can be hazardous to peo-
ple and pets.
Use a proper, safe container to store any gas-
oline drained from the outboard motor. Keep
gasoline away from sparks, flames, people,
and pets.
REMOTE CONTROL MODEL
If it is necessary to remove the outboard motor
from your boat, we recommend that you ask
your authorized Suzuki Marine Dealer to do the
work for you.
MOTOR TRANSPORTING
When transporting the motor, place the motor
either vertically or horizontally.
Vertical transport:
Attach the motor to the carrier by securing
clamp bracket with two clamp screws.
Never use display stand for transportation of the
motor.
Horizontal transport:
1. Drain the gasoline from the engine fuel line.
Refer to the MOTOR REMOVAL section.
2. Raise the tiller handle and rest the motor on
a case protector with the port side down-
wards as shown.
To Next Page
Loading...
