7-40
Turn Signal Light
To replace the turn signal light
bulb, follow these directions.
1. Remove the screw and take off
the lens.
2. Push in on the bulb, turn it to
the left, and pull it out.
Brake Light/Taillight
To change the brake light/taillight
bulb, perform the following steps:
1. Turn the socket 1 counter-
clockwise and remove it.
2. Push in the bulb, turn it to the
left and pull it off.
CAUTION
Overtightening the screws
when reinstalling the lens may
cause the lens to crack.
Tighten the screws only until
they are snug.
To Next Page
Loading...
