Suzuki DR 125 User Manual

CHASSIS 5-43
REAR SHOCK ABSORBER DISPOSAL
'
GAS PRESSURE RELEASE
• Mark the drill hole with a center punch.
• Cover the rear shock absorber with a transparent plastic bag
1.
• Hold the shock absorber
2 with a vice.
• Make a hole with a drill.
'
* The rear shock absorber unit contains high-pressure
nitrogen gas.
* Mishandling can cause explosion.
* Keep away from fire and heat. High gas pressure
caused by heat can cause an explosion.
* Release gas pressure before disposing.
Be sure to always wear eye protection when perform-
ing this procedure.
10 mm
10 mm
10 mm
(0.4 in)
(0.4 in)
Mar
Mar
k the
drill hole.
Mark the
drill hole.

Suzuki DR 125 Specifications

General

Displacement	124cc
Compression Ratio	9.5:1
Transmission	5-speed constant mesh
Bore x Stroke	57.0 mm x 48.8 mm
Ignition	CDI
Front Suspension	Telescopic, oil damped
Rear Suspension	coil spring, oil damped
Front Brake	Disc brake
Rear Brake	Drum
Ground Clearance	265 mm