Suzuki DR600S - Page 142

FRONT
FORK
REMOUNTING
e
When
installing
the
front
fork
assembly,
align
the
top
surface
@
of
the
cap
bolt
to
the
top
surface
(2)
of
the
steering
stem
upper
bracket.
AIR
PRESSURE
SERVICING
e Support the motorcycle by jack or block, and
keep the front wheel off the ground.
e Remove the air valve protection caps and press
the air valve to equalize the fork air pressure
with atmospheric pressure. This must be done
when the forks are cold.
Standard pressure 0 kPa, 0 kg/cm? (0 psi)
CAUTION:
The maximum permissble air pressure is
250 kPa, 2.5 kg/cm? (35 psi) to avoid fork oil
seal and valve damage.
CHASSIS
6-18