Suzuki DR600S - Page 141

6-17 CHASSIS
OUTER
TUBE
METAL,
OIL
SEAL
AND
DUST
SEAL
e Clean the metal groove of outer tube and metal
outer surface.
Install
the
outer
tube
metal
@,
oil
seal
@
and
dust
seal
, Oil seal retainer
®
®.
| CAUTION:
|
Use
special
care
to
prevent
damage
to
the
Teflon coated surface of the Anti-friction
metal when mounting it.
09940-50112
Front
fork
oil
seal
installer
NOTE:
After
installing
the
dust
seal
@,
install
the
dust seal stopper ring ©).
FORK OIL
e For the fork oil, be sure to use a front fork oil
whose viscosity rating meets specifications
below.
Fork oil type Fork oil # 10
Fork oil capacity 475 ml (16.1 US oz)
@ Hold the front fork vertical and adjust the fork
oil level with the special tool.
NOTE:
When adjusting oil level, remove the fork
spring
and
compress
the
inner
tube
fully.
09943-74111 Fork oil level gauge