Suzuki DR600S - Page 86

SERVICING ENGINE 3-52
Be sure to align the aligning marks on the
crankcase with the engraved line marks on the
drive and driven sprockets as shown in the
illustration.
Engage the balancer drive chain onto the each
drive and driven sprocket as shown in the
illustration.
Install the balancer drive chain tensioner and
temporarily fasten the two bolts.
NOTE:
Bolt (1) is longer than the bolt (2).
Painted white ia
ares Aligning mark
32nd pin
Engraved
Aligning
mark
line
mark
Aligning mark
Painted ©
white