Suzuki JR50 User Manual

9-5
Waxing the Motorcycle
After washing the motorcycle,
waxing is recommended to further
protect and beautify the paint.
Observe the precautions speci-
fied by the wax manufacturer.
INSPECTION AFTER CLEANING
For extended life of your motorcy-
cle, lubricate according to “GEN-
ERAL LUBRICATION” section.
Follow the procedures in the
“INSPECTION BEFORE RIDING”
section to check your motorcycle
for any problems that may have
arisen during your last ride.
WARNING
Wet brakes can cause poor
braking performance and may
lead to an accident.
Avoid a possible accident by
expecting longer stopping dis-
tances after washing your
motorcycle. Apply brakes sev-
eral times to let heat dry the
brake pads or shoes.
JR50_03A.book Page 5 Tuesday, April 12, 2005 5:06 PM

Suzuki JR50 Specifications

General

Engine Type	2-stroke, air-cooled, single cylinder
Displacement	49cc
Bore x Stroke	41.0 mm x 37.8 mm
Compression Ratio	6.6:1
Fuel System	Carburetor
Ignition	CDI
Starting System	Kick
Final Drive	Chain
Front Brake	Drum
Rear Brake	Drum
Seat Height	560 mm (22.0 in)
Ground Clearance	135 mm (5.3 in)
Front Suspension	Telescopic
Rear Suspension	Swingarm
Tires Front	2.50-10
Tires Rear	2.50-10