To Next Page

To Previous Page

Automatic Transmission: 5A-9

V-belt Outer Cover

• Install the V-belt outer cover (1).

CAUTION

If there are wear or damage, replace the

gasket (2) with a new one.

• Tighten the V-belt outer cover bolts to the specified

torque.

Tightening torque

V-belt outer cover bolt (a): 8 N·m (0.8 kgf-m, 6.0

lb-ft)

Movable Drive Face Disassembly and Assembly

B831G25106006

Refer to “Automatic Transmission Components

(Page 5A-3)” and “V-belt Type Continuously Variable

Automatic Transmission Removal and Installation

(Page 5A-5)”.

Disassembly

1) Remove the spacer (1).

2) Remove the movable drive plate (2) and rollers (3).

3) Remove the dampers (4).

4) Remove the oil seals (5) and (6).

NOTE

If there are no abnormal conditions, the oil

seals removal are not necessary.

I831G1510023-01

(a)

I831G1510111-02

I831G1510024-01

I831G1510025-01

I831G1510026-01

I831G1510027-01

Suzuki kq750 User Manual

Questions and Answers: