2-10
GEARSHIFT LEVER
This vehicle has a 5-speed trans-
mission which operates as shown
in the illustration. The shift lever is
attached to a ratchet type mecha-
nism in the transmission. Each
time you select a gear, the gear-
shift lever will return to its normal
position ready to select the next
gear. Engage first gear by press-
ing the lever from the neutral posi-
tion. You can shift into higher
gears by lifting on the shift lever
once for each gear. The ratchet
mechanism makes it impossible
to upshift or downshift more than
one gear at a time.
LEFT HANDLEBAR
Rear Brake Lever 1
Apply the rear brake by squeezing
the rear brake lever towards the
grip.
Parking Brake Lock 2
Use this lock to set and lock the
parking brake. Use the parking
brake to help prevent the LT-F400/
F from moving when it is parked,
being started, or at idle. To lock
the parking brake, squeeze the
rear brake lever and engage this
lock. To release the parking brake,
simply squeeze the lever until the
lock button releases.
NOTE: If it is hard to squeeze the
rear brake lever to the position
you can engage the lock, depress
the rear brake pedal and squeeze
the rear brake lever.
To Next Page
Loading...
