4-3
INSPECTION BEFORE RIDING
WHAT TO
CHECK
CHECK FOR:
Steering • Smoothness
• No restriction of movement
• No rattle or looseness
Brakes • Proper lever play
• No “sponginess”
• Parking brake effectiveness
Tire • Proper pressure
• Enough tread depth
• No cracks, rips, or other
damage
Fuel • Enough fuel for the
intended run
• Fuel hose connected
securely
• No damage to fuel tank or
cap
• Tank cap closed securely
Engine stop
switch
Proper operation
Engine oil Correct level
Throttle • Proper cable play
• Smooth response
• Quick return to idle position
Drive chain • Proper tension
• Adequate lubrication
• No excessive wear or
damage
General
condition
• Bolts and nuts are tight
• No rattle from any parts of
the machine with the engine
running
• No visible evidence of
damage
WARNING
Failure to inspect the ATV before
operating it can be hazardous.
Failure to perform proper mainte-
nance can also be hazardous.
Failure to inspect and maintain
your ATV increases the chances of
an accident or equipment damage.
Always inspect your ATV each
time you use it to make sure it is in
safe operating condition. Refer to
the INSPECTION AND MAINTE-
NANCE section in this owner’s
manual.
WARNING
Operating this ATV with improper
tires, or with improper or uneven
tire pressure can be hazardous.
If you use improper tires or
improper or uneven tire pressure,
you may lose control of the ATV.
This will increase your risk of an
accident.
Always use the size and type tires
specified in this owner’s manual.
Always maintain proper tire pres-
sure as described in the INSPEC-
TION AND MAINTENANCE
section.
To Next Page
Loading...
