8-2
TRANSPORTING
It is best to transport the LT-Z50 in the
normal position. It may also be trans-
ported on its back wheels, but this is
not as stable as the normal position.
Before transporting the LT-Z50, drain
the fuel from the carburetor as fol-
lows:
1. Turn the fuel valve lever to the
“ON” position.
2. Drain fuel from the carburetor into
an empty container by loosening
the carburetor drain screw.
3. When the fuel has drained,
retighten the drain screw.
STARTING THE LT-Z50 AFTER
TRANSPORT
To feed fuel into the carburetor, turn
the fuel valve to the “PRI” position.
WARNING
Draining fuel from the carburetor
can be hazardous.
Fuel can catch on fire if you do not
handle it properly.
When draining the carburetor,
always shut the engine off. Do not
smoke, and never drain or refuel
in an area where there are open
flames or sparks. Do not spill the
fuel or you may create a fire haz-
ard. Dispose of drained fuel prop-
erly.
CAUTION
Failure to properly secure the ATV
when transporting it can be haz-
ardous.
Failure to properly secure the
vehicle may result in an accident
or damage to the vehicle.
When transporting the LT-Z50,
lock the parking brake lever and
tie down the vehicle securely with
straps, rope, or some other suit-
able means. Use extra tie downs
when you transport the vehicle in
the standing position.
To Next Page
Loading...
