What to do if Suzuki Monitor power is not turning on?
If your Suzuki Monitor is not turning on, try the following: * Ensure the power connector is securely fastened. * Inspect the power cable connector for any signs of corrosion. * Examine the power cable for damage or corrosion. * Verify the battery provides the correct voltage output. * Press and hold the power button for several seconds.
What to do if Suzuki Monitor discrimination in range is poor?
If you are experiencing poor discrimination in range on your Suzuki Monitor, adjust the rain control.
What to do if Suzuki Monitor range doesn't change?
If you change the range on your Suzuki Monitor, but the radar picture does not change, try to change the range again. If that doesn't work, turn the power off and on again.
What to do if Suzuki Monitor own ship track is not plotted?
If the own ship track is not plotted on your Suzuki Monitor, check if [Tracks Disp] is turned on in the layered menu.
What to do if Suzuki Monitor range rings are not displayed?
If the range rings are not displayed on your Suzuki Monitor, check if [Radar Rings] is turned on in the layered menu.
Why is Suzuki Monitor sensitivity weak after tuning the receiver?
If you've tuned the receiver on your Suzuki Monitor, but the sensitivity is weak, the lifespan of the magnetron may be over. It is recommended to have a technician check the magnetron.
Why is Suzuki Monitor position not fixed?
If the position on your Suzuki Monitor is not fixed, check for interfering objects near the display unit that might be blocking reception.
What to do if Suzuki Monitor touch screen is not responding?
If the touch screen on your Suzuki Monitor is not responding to touch operations: * Press the power key and check that [Touch Screen] in the [Brilliance] pop-up menu is set to [ON]. * Turn the power off, then on again. If the problem continues, contact your local dealer for assistance.
What to do if Suzuki Monitor power is on but nothing appears on the screen?
If your Suzuki Monitor's power is on but nothing appears on the screen, try pressing the power button several times to adjust the brilliance. Also, check to ensure the unit is properly plugged into the power source.
What to do if Suzuki Monitor display has frozen?
If the display of your Suzuki Monitor has frozen, try the following steps: 1. Push the power switch until the power goes off. 2. Turn the power on again. 3. Push the hard reset button, located below the microSD card slots.
Covers manual usage, warranty, equipment operation, and manual retention.
Instructions for discarding the product and used batteries according to regulations.
Highlights warnings for electrical shock, water ingress, and handling the display unit.
Lists all parts included in the standard package for the display unit.
Lists additional accessories and components available for purchase.
Covers mounting the main display unit on a desktop or flush mount.
Instructions for installing the optional FURUNO DRS4W radar sensor.
Guidance for installing various types of transducers on the vessel.
Details for mounting transducers through the hull and on the transom.
Guidance for mounting transducers inside the hull and Triducer installation.
Installation instructions for ST-02MSB and ST-02PSB speed/temperature sensors.
Installation instructions for T-04MSB and T-04MTB temperature sensors.
Details on connecting NMEA0183 equipment and NMEA2000 CAN bus network.
Instructions for connecting the transducer to the XDR port.
Guides through the initial setup process upon first system power-on.
Explains how to navigate and use the system's menu interface.
Steps for setting up the SUZUKI Gateway and engine parameters.
Procedures for setting up the fish finder's initial parameters.
Guides for setting up the radar and aligning the antenna heading.
Accessing and configuring NMEA0183 and NMEA2000 sensor settings.
Selecting data sources and configuring NMEA output sentences/PGNs.
Calibrating sensors and resetting interface menu settings to defaults.
Routine checks for cables, display unit, and radar antenna for optimal condition.
Guides for resolving common problems like power, display, and touch screen issues.
Procedures to reset menu settings or all unit settings to factory defaults.
General| Resolution | 800 x 480 pixels |
|---|---|
| Aspect Ratio | 16:9 |
| Contrast Ratio | 500:1 |
| Response Time | 25ms |
| Screen Size | 7 inches |
| Input Voltage | 12 V DC |
| Power Consumption | 5 W |
| Operating Temperature | 50°C |
| Storage Temperature | -20°C ~ 60°C |
To Next Page
