To Next PageTo Next Page
Need help?Do you have a question about the Suzuki SMD 9 and is the answer not in the manual?
General| Aspect Ratio | 16:9 |
|---|---|
| Contrast Ratio | 500:1 |
| Response Time | 25ms |
| Screen Size | 9 inches |
| Resolution | 800 x 480 |
| Input Voltage | 12V DC |
| Storage Temperature | -20°C to 70°C |
Congratulates the owner on the purchase and emphasizes SUZUKI's quality and reliability.
Explains the eGuide's features, content structure, and interaction methods.
Details the procedure for powering the display unit on and off, including start-up.
Explains how to adjust screen brightness and change color palettes.
Describes how to lock the touch screen to prevent accidental operations.
Covers selecting, adding, editing, and deleting display pages on the home screen.
Introduces the different menu types: slide-out, layered, pop-up, and settings menus.
Explains how to display, hide, edit, and add navigational data boxes on the screen.
Details how to enable or disable the beep sound during the power-off countdown.
Explains how to set up two-finger tap gestures as shortcuts for operations.
Covers marking MOB position and how to erase an MOB mark.
Guides on connecting to a wireless LAN for updates and information.
Instructions on using simulation mode for familiarization with the system.
Introduces the Engine Display function and shows examples of its configurations.
Explains how to change displayed engine data and delete instrument information.
Details how to activate, deactivate, and use Troll Mode for steady trolling speed.
Covers accessing the Engine Setup menu and using Suzuki Diagnostic System Mobile.
Explains how to check engine alarms and view diagnostic information.
Describes the instrument display function for viewing vessel data.
Details how to set up and edit multi-instrument displays in split windows.
Covers changing instruments, information, and deleting instrument pages.
Explains how to use Countdown, Countdown + Trip, and Stopwatch timer instruments.
Guides on setting up and displaying data in graph form for single and double graphs.
Introduces the plotter page and how to select different chart types.
Explains how to change display range and orientation modes (North Up, Head Up).
Covers settings for the own ship icon, including COG vector and heading line.
Details how to offset the own ship icon and restore factory defaults for settings.
Explains how to use the cursor and ruler for measurements on the chart.
Covers changing chart viewing angles and accessing C-MAP chart details.
Describes how to activate Radar Overlay and Weather Overlay features.
Explains how to use FURUNO NAVpilot features with the display unit.
Guides on showing tide graphs and viewing tidal current information.
Explains how to view satellite signal strength and status for GPS.
Introduces boat tracks and how to show or hide them on the plotter.
Details how to start, stop, and set up track recording parameters.
Covers methods for deleting individual tracks, sections, or all tracks.
Explains how to create, set up, and manage points and event marks.
Guides on viewing, searching, sorting, and filtering the points list.
Details how to move points on-screen and edit their details from the list.
Covers methods for deleting individual points from screen or list.
Explains how to create, color, find, and delete polylines and their vertices.
Defines a route and its components for navigation.
Guides on creating temporary quick routes and planned routes with waypoints.
Explains how to use Easy Routing to automatically construct safe routes.
Covers displaying, searching, sorting, and editing route details.
Details how to extend routes and add new points along route legs.
Covers methods for deleting individual route points and entire routes.
Explains setting route calculation speed and showing/hiding routes on screen.
Guides on selecting routes, restarting navigation, and following routes in reverse.
Details setting XTE width and arrival notification area for routes.
Introduces the Fish Finder display and how to set up the transducer.
Covers starting/stopping transmission and selecting display modes like zoom.
Explains the A-scope display and bottom discrimination features.
Details automatic modes (Cruising, Fishing) and manual operation settings.
Guides on adjusting gain, reducing clutter, and minimizing interference.
Covers balancing echo strength with TVG and using the Zero Line feature.
Explains picture advance speed and measuring depth/time on the screen.
Covers display settings, ACCU-FISH™ feature, and its considerations.
Details activating ACCU-FISH™, correcting fish size, and applying display filters.
Explains RezBoost™ feature and setting up fish detection notifications.
Guides on resetting Fish Finder menu settings to factory defaults.
Introduces the radar screen, transmit/standby, and tune initialization.
Explains how to reduce clutter and adjust radar display range.
Covers changing orientation modes and selecting the radar sensor.
Details showing own ship icon and using EBL/VRM for measurements.
Explains how to shift the radar screen and use the echo stretch feature.
Guides on setting up sentry zones and changing radar echo colors.
Covers setting bearing scale reference and configuring the initial setup menu.
Details how to reset radar menu settings to factory default.
Introduces AIS system and how to display AIS target information.
Explains AIS target symbols and how to adjust the activation range.
Covers ignoring slow targets and showing/hiding AIS target identification.
Guides on viewing, sorting, and interacting with the AIS target list.
Details setting up CPA and TCPA notifications to avoid dangerous situations.
Covers AIS SART notifications, ICOM data reception, and DSC message info.
Explains selecting DSC devices and showing/hiding DSC target IDs.
Guides on viewing, sorting, and deleting DSC messages.
Defines notifications and system messages displayed by the system.
Explains how to access and navigate the main notifications menu tabs.
Details how to configure the buzzer sound and interval for notifications.
Covers setting up grounding, depth, anchor, and XTD notifications.
Explains how to configure arrival, speed, and trip distance notifications.
Guides on setting up temperature and sudden temperature change notifications.
Details how to set up notifications for tank levels and wind conditions.
Explains how to restore default settings for the Notifications menu.
Covers viewing, filtering, and saving the notifications list to a microSD card.
Covers general settings like date, time, UTC, and quick guide setup.
Details how to set measurement units for fuel, bearing, and position.
Guides on saving/loading data like routes, points, tracks, and settings.
Explains how to use the search function to find chart information.
Details how to take screenshots and manage them on a microSD card.
