Suzuki SMD 9 - Ignoring Slow Targets and Showing Target IDs; AIS List Overview and Sub-Menu Operations

10. AIS/DSC OPERATIONS
10-2
10.5 How to Ignore Slow Targets
You can set a speed for “slow” targets. Targets moving at speeds than this settings
are ignored, helping keep the screen free of unnecessary AIS targets. Targets
deemed as “slow” do not trigger the CPA/TCPA notifications.
1. From the [Home] screen, tap [Settings] => [AIS and DSC].
2. Tap the keyboard icon at [Ignore Slow Targets], then enter the desired speed, or
slide the slider bar to select a speed.
3. Close the menu.
10.6 How to Show AIS Target Data
Tap an AIS target symbol to show AIS target information. The information appears at
the bottom-right of the screen.
10.7 Show/Hide the AIS Target ID
You can show the AIS target’s identification below the AIS symbol.
1. From the [Home] screen, tap [Settings] => [AIS and DSC]=> [AIS].
2. Tap the toggle box at [Show Target IDs] to show [ON] or [OFF] as required.
3. Close the menu.
10.8 AIS List Overview
10.8.1 How to show the AIS target list
From the [Home] screen, tap [List] => [AIS].
10.8.2 How to sort the AIS target list
Tap a sorting method at the top of the list.
Tap a sorting method to sort the list.
Tap the Refresh
button to update
the list.
Drag the scrollbar to
show targets which
are not displayed
on-screen.
CPA/TCPA AIS target’s location (latitude/longitude)
A
IS target name,
call sign, distance
and bearing from
own ship.